Decor paper Oak 2902-09
Oak wood decor paper for laminated flooring, can be used for melamine paper and impregnated paper
The surface has a wood grain design, which is widely used on the surface of particleboard and medium density fiberboard. No adhesive is required when sticking them to the surface of the board. Usually, it is pressed on the surface of the board by a hot press. With its high scratch resistance, it is often used in laminate flooring and HPL.
Main types of impregnated paper for melamine veneer
Melamine impregnated paper is divided into three categories: plain paper, printing paper, and wear-resistant paper. The products can be divided into two categories: facial tissue and paper-based. Plain paper is distinguished by primary color paper and printing paper. The base paper is the best, with pure tone, not easy to change color, and uneven tone of printing paper.
Wood grain paper is printed on the basis of base paper. According to the actual requirements of wood grain, the number of printing rollers is also different.
Art printing paper: Senjia's art series is the most advanced.
Printing ink, melamine wood grain paper for water-based ink. There are domestic ink and imported ink. The main difference is the duration of weather resistance. To identify the printing quality, you can use a magnifying glass to observe the amount of "white". If there is too much white, it will affect the purity of the hue. Except for a lot of whites that can be seen with the naked eye, the quality is very average. worth. In addition, without tomo, color is not allowed.
If the color is burnt, the ink quality is not good.
The nt of melamine determines the wear resistance of the melamine surface. Moisture-proof and mildew-proof quality.
The best impregnated paper, the melamine content is 100%, followed by 70%, most of which currently use 70% impregnated paper. The shelf life of pure melamine impregnated paper exceeds 1 year.
The sugar gum with the worst fluidity, such as melamine gum, will immediately appear bonded if exposed to the air for 5 minutes. Therefore, many people say that it should be placed in an air-conditioned room to prevent premature bonding and solidification. Sugar, easy to dissolve Because of water, there is no moisture, and the time is not long. Because of the wiping, the protective layer on the surface is easily wiped off and melted. Correspondingly, in order to change this problem, manufacturers of sugar gum paper have added more curing agent, so there will be quality problems that will expire in a week or 15 days and will be cured in advance. Simple test method: Put a wet towel on the veneer, and check the surface change the next day, whether it is blistering or swelling. Whether the surface gloss is damaged after wiping.
There is a kind of impregnated paper, using urea-formaldehyde glue, the proportion of melamine is 60%, 50%, 40%, 30%. Although it is better than sugar gum, the shelf life can only reach 3 months, which is less. The simple identification method is: when the fire burns the surface, there is a urea smell. Same as E1, E2, E0.
Paper weight (thickness)
Melamine paper is based on color requirements, printing requirements, impregnation paper yield requirements and various uses.
Category: 70g, 80g, 85g, 90g, 110g, 120g, 135g, etc.
In China, 80 grams of titanium white pockmark is generally enough, but the frosted surface cannot be pressed, which will cause the phenomenon of bottoming. Warm white, beige matte surface does not exceed 110 will also produce penetration. For 85 grams of hemp noodles, 90 grams will do.
Melamine impregnated paper, using high-quality printing paper, impregnated with melamine resin, and then bonded to various wood-based panels.
Various wood grain patterns, such as: beech, cherry, pine, oak, teak, maple, etc. We also provide a variety of solid colors, such as: black, white, yellow, blue, silver, gold, etc.